new 10 1/2 ft inboard jet boats

Post Reply
montanaman
Posts: 79
Joined: 27 Feb 2010, 13:44

new 10 1/2 ft inboard jet boats

Post by montanaman » 20 Sep 2015, 19:10

starting to put together a cpl of these 10 1/2' inboard jet boats. they will have 155hp turbo engines with 148mm jet pumps with stainless impellers and liners. seats for 2 with space in the bow for storage and rack on the back. they are made of polyethylene rotationally molded hulls which makes them super strong and slide over the shallows with ease
Attachments
312001_orig.jpg
IMG_1414.JPG

CedarRiverScooter
Posts: 946
Joined: 13 Nov 2014, 08:01

new 10 1/2 ft inboard jet boats

Post by CedarRiverScooter » 20 Sep 2015, 20:56

How can you control 155hp in that small of a boat?

Texas Prowler
Posts: 457
Joined: 20 Aug 2015, 19:33

new 10 1/2 ft inboard jet boats

Post by Texas Prowler » 20 Sep 2015, 21:36

Looks like fun!

montanaman
Posts: 79
Joined: 27 Feb 2010, 13:44

new 10 1/2 ft inboard jet boats

Post by montanaman » 20 Sep 2015, 21:45

CedarRiverScooter wrote:How can you control 155hp in that small of a boat?
it is very easy to control. the boats just need to be set up it . they need a foot throttle and not a hand throttles
then need a fast steering helm [ 1/4 turn lock to lock ] and not a very slow hel like they seem to put in way to many jet boats
we build a lot of our own helms and single lever controls in house which really help in setting up a jet boat to run and drive its best

CedarRiverScooter
Posts: 946
Joined: 13 Nov 2014, 08:01

new 10 1/2 ft inboard jet boats

Post by CedarRiverScooter » 20 Sep 2015, 21:54

Sounds like you are a professional shop that knows what they are doing.

I would like to see a video of it when you get it running.

ADIBOO
Posts: 88
Joined: 20 Jul 2014, 22:11
Location: Oregon
Contact:

new 10 1/2 ft inboard jet boats

Post by ADIBOO » 20 Sep 2015, 22:17

That looks like a scary fun toy right there! Approx. how much $$$ does one of these run?

montanaman
Posts: 79
Joined: 27 Feb 2010, 13:44

new 10 1/2 ft inboard jet boats

Post by montanaman » 20 Sep 2015, 22:26

not to sure on $ amounts yet
we are going to build up 2 and see where the price comes in at for a finished turn key boat
we do plan to offer them in a kit form also from just the bare hull to complete kit which would have hull,engine,jet pump,helm,cables,gauges,seats and fuel cell
what will be nice is guys that can turn a wrench can buy a bare hull and use there own engine/pump to keep cost low

Texas Prowler
Posts: 457
Joined: 20 Aug 2015, 19:33

new 10 1/2 ft inboard jet boats

Post by Texas Prowler » 20 Sep 2015, 23:23

Keep up the good work! This will sell like hot cakes...

Post Reply