G3 1860 CCJ side panel removal

Post Reply
User avatar
Posts: 15
Joined: 05 Mar 2010, 17:54
Location: Alpharetta, GA 30004

G3 1860 CCJ side panel removal

Post by kthmarks » 16 Feb 2018, 19:22

I thought I'd share with you (for the guys who have one), what's beneath the side panel after you drill out +/- 60 pop rivets. I installed a Minn Kota 110 charger for my starter battery under the console and ran the wires to the stern this way. I have some sheet metal experience so the drilling of the heads of the rivets was no big deal and the rivet shafts were easily tapped out with an 1/8 (sometimes 3/16") drift.

Hope this is helpful to someone in the future should they need the info.

User avatar
Posts: 5002
Joined: 27 Nov 2010, 09:36
Location: Houston, TX & Crossville, TN

G3 1860 CCJ side panel removal

Post by richg99 » 17 Feb 2018, 19:04

That is good of you to post that information for the next guy.


Post Reply