It is currently 21 Jul 2018, 11:14
Join the free forum or login with your account and the annoying banner goes away

BoatCoversDirect

All times are UTC - 5 hours [ DST ]




 Page 2 of 2 [ 26 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: 09 Jan 2018, 02:44 
User avatar

Joined: 14 Aug 2016, 22:25
Posts: 1262
Location: Clayton California
SeaFaring wrote:
I just picked up a new Shimano NASCI 3000 for $99.

The way I justified spending that much was that the reel has 20lbs of drag in 3000 size - most reels that small have 10-15 lbs of drag. This makes it a more versatile inshore reel. One of my primary use cases is vertical jigging, so the light weight of a small reel with a composite frame was desirable.

I find the main advantage of higher end reels is better drags, and in the case of baitcasters, better cast control and bearings.

That said, I’m super happy with my $29 Pflueger Trion micro underspin. With 4-6 lb mono, you don’t need big drag, and what there is is pretty smooth.


Sent from my iPhone using Tapatalk


With that drag you can load her up with higher test braid. Come back and do a review (I guess we will have to wait until after the big thaw). I, and I think a lot of others, gain a lot from the gear feedback.



_________________
Have Rod - Will Fish
Offline
 Profile  
 
PostPosted: 09 Jan 2018, 21:05 

Joined: 31 Aug 2017, 15:20
Posts: 237
Location: Maryland
LDUBS wrote:
SeaFaring wrote:
I just picked up a new Shimano NASCI 3000 for $99.

The way I justified spending that much was that the reel has 20lbs of drag in 3000 size - most reels that small have 10-15 lbs of drag. This makes it a more versatile inshore reel. One of my primary use cases is vertical jigging, so the light weight of a small reel with a composite frame was desirable.

I find the main advantage of higher end reels is better drags, and in the case of baitcasters, better cast control and bearings.

That said, I’m super happy with my $29 Pflueger Trion micro underspin. With 4-6 lb mono, you don’t need big drag, and what there is is pretty smooth.


Sent from my iPhone using Tapatalk


With that drag you can load her up with higher test braid. Come back and do a review (I guess we will have to wait until after the big thaw). I, and I think a lot of others, gain a lot from the gear feedback.


I’m really happy with it - my fishing buddy and I have caught a couple of keeper striped bass on it.

I also realized that by taking it off of the 6’ slow action jigging rod and putting it on my 7’ medium action spinning rod, it will also be a good walleye/smallmouth rig.

I have a hard time doing full reviews though because I just don’t get to fish enough to really put the screws on my tackle. As some of you have probably realized, I can be a bit wordy. But with fishing tackle I usually don’t get past “it’s smooth. I like it.” Or whatever it does that I don’t like, nothing in that category on the NASCI yet.


Sent from my iPhone using Tapatalk


Offline
 Profile  
 
PostPosted: 25 Jan 2018, 21:01 

Joined: 25 May 2015, 22:50
Posts: 62
Location: Northern California
It was never about the price tag or the logo. Fishing rods are all about the feel. Ugly Stiks never felt right to me. 40 years ago I worked in a bait and tackle shop. I built a Lamaglass ultralight rod, and got a Fenwick HMG graphite bass rod for Christmas. Both are still sticking fish on a regular basis. I have added a couple of Shimano and BPS rods to the mix.
For years all of my baitcaster reels were the same. All Abu 5500c. It made life easy. Now I am playing with a $70 low profile Abu with magnets. Do not know if it will last, but it seems to be able to skip jigs under docks.


Offline
 Profile WWW  
 
PostPosted: 26 Jan 2018, 06:24 
Site Admin
User avatar

Joined: 29 Nov 2006, 21:00
Posts: 17210
Location: Shrewsbury, MA
I tried skipping jigs with a bait caster twice, never again. Line is to expensive to replace. You have never seen bird nests bigger than those.


Sent from my iPhone using Tapatalk



_________________
Be Respectful!
This Site is Rated PG, No Politics, No Porn, No Bashing allowed!
Offline
 Profile WWW  
 
PostPosted: 28 Jan 2018, 18:24 
User avatar

Joined: 10 Apr 2011, 06:19
Posts: 680
Location: New River in Virginia
Jim wrote:
I tried skipping jigs with a bait caster



I've tried it a few times.....makes ya feel pretty good when it goes well.



_________________
My Tinny is a tool, a means to an end, if you will.

New River Smallies

Case Plastics Pro Staff
Offline
 Profile WWW  
 
PostPosted: 09 Feb 2018, 20:27 
User avatar

Joined: 02 Jun 2015, 09:56
Posts: 397
Location: southern indiana
I can't bring myself to buy real high end reels new. For one too many of them are made in china and have an American labor rate price tag on them. I have newer reels form before I got into repairing old reels, my favorite newer median priced reels are the pflueger presidential and arbor. I'm a fan of an ugly stik as well hard to beat for the money. I will admit my high end rods are much better, and when it comes to some fishing when I really want that extra feel they give I notice it. Anyways on the reels I'm a big fan of the older usa made penn reels like z714's, 430's, and the 4300's for a small spinner, they had larger ones as well like z712 and z710, 440/450, they were all really well made reels with worm gear drive setups. I have two old 430's I took apart cleaned everything regreased and put back together with new carbon fiber drag washers. Also the old DAM quick reels are really well made, I have number of them now after discovering them over recent years. I get a lot of enjoyment though from landing fish with reels that are from the 60's that I personally took apart rebuilt and use now. Kind of the same feeling when you've fixed the car or anything for that matter and it works great again. Rods I have a few nicer ones I've managed to score second hand for good prices, I have two falcon rods, a lamiglas xcel bass rod, an older st croix. I did buy one of the falcons new, but it was on sale, and I still got a military discount on it to make it pretty reasonable. Sometimes it's worth it, I figure if I take good care of my good equipment it will last me a long time, and I will get my money's worth out of it.


Offline
 Profile  
 
PostPosted: 14 Feb 2018, 12:02 
User avatar

Joined: 10 Apr 2011, 06:19
Posts: 680
Location: New River in Virginia
handyandy wrote:
made in china and have an American labor rate price tag on them.



That is pretty much everything in our homes or everything we own, right?

I remember Converse Chucks being made here and were $24 a pair. Reebok bought them, went off shore where they were paying a buck or so per shoe, jacked the price to $50 per pair. Thank you cooperate shareholders for showing us your greed.

These were mentioned not to highjack the thread, because All Stars were my original footwear for fishing.



_________________
My Tinny is a tool, a means to an end, if you will.

New River Smallies

Case Plastics Pro Staff
Offline
 Profile WWW  
 
PostPosted: 15 Feb 2018, 17:27 
Donor
User avatar

Joined: 02 Jan 2018, 15:16
Posts: 244
Location: Parkersburg, WV
LDUBS, my parents didn't tell me I had an identical twin. Grew up earning every penny I had. No hand outs. Two jobs when first married, etc., etc.
I also remember the Garcia 300's when they were looked at as pretty good stuff.
I have a Shimano Bantam 10x that I bought many years ago and when I grab something to head for the pond or river, it is that itty bitty Shamano. My 5500 and 6500 hardly sees any use.
Same argument for golf clubs. There are those that are logo and the "newest" obsessed, but my bought used old Taylor Made RAC LT's will keep up with anybody that I play with.


Offline
 Profile  
 
PostPosted: 20 Feb 2018, 13:48 
User avatar

Joined: 14 Aug 2016, 22:25
Posts: 1262
Location: Clayton California
WV1951 wrote:
LDUBS, my parents didn't tell me I had an identical twin. Grew up earning every penny I had. No hand outs. Two jobs when first married, etc., etc.
I also remember the Garcia 300's when they were looked at as pretty good stuff.
I have a Shimano Bantam 10x that I bought many years ago and when I grab something to head for the pond or river, it is that itty bitty Shamano. My 5500 and 6500 hardly sees any use.
Same argument for golf clubs. There are those that are logo and the "newest" obsessed, but my bought used old Taylor Made RAC LT's will keep up with anybody that I play with.


I had a set of Powerbilt TPS irons made for my height for many years. I passed them on a few years ago when I finally recognized I wasn't spending any time on the links.



_________________
Have Rod - Will Fish
Offline
 Profile  
 
PostPosted: 26 Feb 2018, 12:35 
User avatar

Joined: 02 Jun 2015, 09:56
Posts: 397
Location: southern indiana
New River Rat wrote:
handyandy wrote:
made in china and have an American labor rate price tag on them.



That is pretty much everything in our homes or everything we own, right?

I remember Converse Chucks being made here and were $24 a pair. Reebok bought them, went off shore where they were paying a buck or so per shoe, jacked the price to $50 per pair. Thank you cooperate shareholders for showing us your greed.

These were mentioned not to highjack the thread, because All Stars were my original footwear for fishing.


unfortunately this is all to often the case, then we give big cooperate tax cuts for so many that have done this. Anyways staying on topic there is still some gear made here that isn't horribly priced. Much of the st croix line is still USA made with the exception of some like the triumph, x, rage series of rods. Their avid and premier series of rods are usa made and pretty competitive in price when compared to similar rods. Now obviously your ugly stik is much cheaper, but having some of both I can tell you there is a big difference between my st croix premier rod I have and one of my many ugly stiks. Reels it's hard any of the usa made ones are quiet expensive that's why I enjoy reviving old reels like german made dam quicks, usa made penns. I try to buy American if at all possible and economically feasible. But my waders are USIA waders only USA made waders I know of, shoes it's hard most of my work boots are USA made double H's also just bought a pair of thorogood boots most of theirs are USA made they seem pretty good so far. Staying on fishing gear Falcon rods still makes a lot of their rods in the USA their bucco micro series is their most affordable USA line like everyone else they do have off shore made rods. I don't know about lamiglas these days I have an excel series bass rod of theirs that was made in the USA, not sure about now.


Offline
 Profile  
 
PostPosted: 26 Feb 2018, 14:01 
User avatar

Joined: 10 Apr 2011, 06:19
Posts: 680
Location: New River in Virginia
Andy, some Redwing boots are still made here.


I have two pair of these, one is 10 years old and still going!
Image



_________________
My Tinny is a tool, a means to an end, if you will.

New River Smallies

Case Plastics Pro Staff
Offline
 Profile WWW  
 
Display posts from previous:  Sort by  
 Page 2 of 2 [ 26 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Join the free forum or login with your account and the annoying banner goes away

BoatCoversDirect