Another new to me boat
Another new to me boat
Well here I am again starting work on my newest boat. Seams to be a pattern here. Just pick up a 1995 tracker V-17 and like all my previous boat I got to do a little work on it. And of coarse it something that is hard to find. So I’ll just ask if anybody has one ore may know we’re I could get a rear corner end cap aluminum casting. And possibly a fuel tank cover. And maybe some suggestions about fixing or changing the carpet.
Another new to me boat
Need pictures ... what "kind" of fuel tank cover? You mean a cap or an aluminum hatch or sheet cover over a tank recess?
Cast aluminum end or corner caps can be had on eBay, but you may not find an identical match.
Toss the carpet and throw in Nautolex marine vinyl from DefenderUSA... mine was ~21-years old when I sold the boat and it still looked very good to better once power-washed!
Cast aluminum end or corner caps can be had on eBay, but you may not find an identical match.
Toss the carpet and throw in Nautolex marine vinyl from DefenderUSA... mine was ~21-years old when I sold the boat and it still looked very good to better once power-washed!
#1) 1st tin rebuild, 18' Lund http://forum.tinboats.net/viewtopic.php?f=21&t=36583
#2) 25' Parker refurb from EMPTY hull http://www.classicparker.com/phpBB3/vie ... p?f=15&t=6
#3) 16' V-tin rebuild http://forum.tinboats.net/viewtopic.php?f=21&t=36465
#4 Procraft SV14
#5) 16' Starcraft entirely NEW Transom Skins http://forum.tinboats.net/viewtopic.php?f=3&t=37548
#2) 25' Parker refurb from EMPTY hull http://www.classicparker.com/phpBB3/vie ... p?f=15&t=6
#3) 16' V-tin rebuild http://forum.tinboats.net/viewtopic.php?f=21&t=36465
#4 Procraft SV14
#5) 16' Starcraft entirely NEW Transom Skins http://forum.tinboats.net/viewtopic.php?f=3&t=37548
Another new to me boat
Thanks for the help locating that part I checked it out and ended up buying it now I’ll start looking at what I’m gonna do for carpeting or maybe something else for the flooring in the front