Inspired Lurker

*****This section is for Full Boat Projects Only*****
Post Reply
F.R.E.D.
Posts: 1
Joined: 14 Jun 2018, 21:09

Inspired Lurker

Post by F.R.E.D. » 15 Jun 2018, 11:11

Been lurking for a while and shamelessly stealing all your great ideas. 8) 14 ft 1974 lonestar, powerdrive bow mount with 9.9 merc. Most of framing is 1/2" angle 1/8 thick with some 1" box for extra strength. Deck is 1/2" with 2 coats of oil base poly. The cap for bow mount is old alum road sign, I rolled a 90 degree bend on the aft end and it added a lot of strength. I drilled and bolted to bow and used 5200 as a gasket. Going to add a pedastel seat soon.Thank you for all the ideas, helped a great deal. TIGHT LINES!
Attachments
20180609_160017.jpg
20180609_115122.jpg
20180528_114053.jpg
20180527_202436.jpg
20180526_192543.jpg

Post Reply